Screening various Yarrowia lipolytica strains for citric acid production

Citric acid (CA) productivity by Yarrowia lipolytica dependents on strain type, carbon source, carbon to nitrogen (C/N) molar ratio as well as physicochemical conditions (pH, temperature, oxygen transfer rate, etc.). In the current study, 10 different Y. lipolytica strains were first challenged in shake-flask culture for CA production in a glucose-based media under nitrogen-limited conditions. For the most promising one, strain K57, CA productivity was monitored during culture in batch bioreactor for three initial C/N molar ratio (167, 367, and 567 Cmol/Nmol). The highest CA yield (0.77 g/g glucose), titre (72.3 g/L CA), and productivity (0.04 g/g.h) were found for C/N ratio of 367. However, the highest growth rate was obtained for an initial C/N ratio of 167. From these results, Y. lipolytica strain K57 could be considered to produce CA at higher titre on glucose-based medium in batch bioreactor than others Y. lipolytica strain reported in the literature.     

A novel constitutive stress-strain law for compressive deformation of the gas diffusion layer

Substantial compressive deformation occurs in the gas diffusion layer (GDL) under the pressure applied during the fuel cell assembly. The GDL deformation has a direct impact on the efficiency and performance of the fuel cell since it leads to the alteration of the GDL microstructure and porosity. This makes the accurate characterization of the GDL compressive behavior crucial for analyzing the fuel cell performance and its optimal design. In this paper, analytical, experimental, and numerical methods have been employed to comprehensively study the constitutive law of the GDL under compression. Starting from the recently developed stress-density relations, the constitutive stress-strain equations are derived for the GDL and the relation between the stress-density and stress-strain laws are revealed. Experimental compression tests have been performed on GDL samples and the capability of the proposed constitutive law in capturing the real behavior of the material has been proved. It has been observed that the simplifying assumption of constant zero Poisson's ratio in the through-plane direction made in many previous studies cannot accurately represent the GDL material behavior and a modification is proposed. The developed constitutive law has been successfully implemented in a finite element model of the GDL-bipolar plate assembly in the fuel cell structure and the variations of the GDL porosity, density, and through-plane Young's modulus and Poisson's ratio have been investigated for different vertical displacements of the bipolar plate.     

Weighted Self-Adaptive Threshold Wavelets for Interpolation Point Selection Used in Interconnect MOR

超高膨胀比涡轮噪声控制技术研究

赵辛午，黄洪雁

（哈尔滨工业大学 能源科学与工程学院，哈尔滨 150001）

中文说明：

气动噪声控制是提高鱼雷隐身性能的关键技术之一。本文讨论了局部进气的超高膨胀比涡轮气动噪声产生机理。相邻喷嘴与流道之间形成的三角形非出气区域引起的尾迹、圆周局部进气设计引起的不稳定性、喷嘴和转子之间区域形成的复杂激波系是这类涡轮气动噪声产生的三种主要来源。因此，本文提出了两种气动噪声控制方法，增加转静子之间的轴向间距，喷嘴下俯、双侧修型和尾缘吹气。数值模拟结果表明：在对原涡轮气动性能影响不大的情况下，优化后涡轮的气动噪声下降10 dB以上。

关键词：超高膨胀比涡轮、气动噪声、流动特性、优化

     

A simple permanent deformation model of rockfill materials

Existing experimental results have shown that using a semi-log linear relationship between the permanent volumetric strain and cyclic number underestimates the volumetric deformation of rockfill materials with a large cyclic number, and that the error increases with the confining pressure. The existing permanent deformation models are not suitable for the seismic safety analysis of high dams during strong earthquakes. In this study, a series of large-scale triaxial cyclic loading tests of rockfill materials were performed, and a new permanent deformation model of rockfill materials was developed and validated with three kinds of rockfill materials. The results show that the proposed model can properly reflect the general features of the permanent deformation of rockfill materials. The main features of the model are as follows: (1) relations between the cyclic number and permanent volumetric/shear strain are described by hyperbolic functions, which can avoid underestimating the volumetric deformation occurring during strong earthquakes; (2) the model can capture the effect of the mean effective stress on the permanent volumetric strain, with greater confining pressure correlating to greater permanent volumetric deformation, and the permanent volumetric strain under low confining pressure near the dam crest can be well represented; and (3) the model can reflect the effect of the consolidation stress ratio on the permanent shear strain.     

Smart utilization of renewable energy sources in a microgrid system integrated with plug‐in hybrid electric vehicles

Mass roll‐out of plug‐in hybrid electric vehicles (PHEVs) and significant penetration of renewable energy sources in distribution system play a major role in delivering low carbon environment. However, placing and utilizing these units randomly result in overloading, increased power loss, and reduced voltage profile. This paper responds to these technical challenges by using a strategic placement method for locating the distributed generation (DG) and the charging station (CS) of PHEVs in a multi‐zone distribution system. For simultaneously scheduling of these units in each zone, the smart energy management framework is proposed in this paper. Apart from usual energy management constraints, this paper also incorporates the real‐time constraints involving the capacity of PHEV batteries, the mobility pattern, and the power level of the charging infrastructure. The simulation studies are carried out for each hour of a day. To cope with this time constraint execution, particle swarm optimization algorithm‐based approach is used. The proposed framework is tested in IEEE 33 and IEEE 69 bus radial distribution system. The obtained results imply that the presented energy management framework provides maximum profits for the vehicle owner, and meanwhile it fulfills preferences of the user in each zone simultaneously.     

基于多级混合澄清槽的PUREX流程的计算模型

主要通过建立分配比模型、化学反应模型、传质模型构建了一套基于混合澄清槽的PUREX流程中关键循环过程的计算模型（mathematical model for main PUREX process based on mixer-settler，简称MPMS），用于计算各级单元的物料浓度。通过检验两组具有代表性的PUREX工艺流程，模拟结果较好地匹配实验数据，表明该计算模型具有良好的精确性。该计算模型将为基于多级混合澄清槽的PUREX流程模拟提供有益帮助。     

Microfluidic Tumor-on-a-Chip Model to Study Tumor Metabolic Vulnerability

Tumor-specific metabolic adaptations offer an interesting therapeutic opportunity to selectively destroy cancer cells. However, solid tumors also present gradients of nutrients and waste products across the tumor mass, forcing tumor cells to adapt their metabolism depending on nutrient availability in the surrounding microenvironment. Thus, solid tumors display a heterogenous metabolic phenotype across the tumor mass, which complicates the design of effective therapies that target all the tumor populations present. In this work, we used a microfluidic device to study tumor metabolic vulnerability to several metabolic inhibitors. The microdevice included a central chamber to culture tumor cells in a three-dimensional (3D) matrix, and a lumen in one of the chamber flanks. This design created an asymmetric nutrient distribution across the central chamber, generating gradients of cell viability. The results revealed that tumor cells located in a nutrient-enriched environment showed low to no sensitivity to metabolic inhibitors targeting glycolysis, fatty acid oxidation, or oxidative phosphorylation. Conversely, when cell density inside of the model was increased, compromising nutrient supply, the addition of these metabolic inhibitors disrupted cellular redox balance and led to tumor cell death.     

Sex ratio and reproduction of invasive red devil, (Amphilophus labiatus: Cichlidae) in Lake Sentani,Indonesia

The Red Devil Cichlid Amphilophus labiatus (Günther 1864), native to Lake Nicaragua and Lake Managua in Central America, is widely cultivated as an attractive, yet aggressive, aquarium fish that has been introduced to several freshwater locations around the world. It was recently introduced into Lake Sentani in Indonesian New Guinea, a naturally rich aquatic habitat home exhibiting a diverse fauna with high endemism. To better understand the invasive potential and impacts of A. labiatus, the present study was undertaken to describe the sex ratio and reproductive potential of A. labiatus in Lake Sentani through determination of its gonad maturation stages, gonado‐somatic index and fecundity. The fish were collected using floating gill nets at six locations around the lake between June and August 2019. Sex identification, gonads type, gonad stage and weight, fecundity were observed in the laboratory. Of the total 542 of A. labiatus collected during the survey, 345 individuals were sampled for sex ratio and reproduction. The overall male:female ratio was skewed towards males in a ratio of 3.28:1. The males were generally found to be in the gonad maturation stage I, while the females were commonly found in gonad maturation stages III and IV for all sampling locations during the study period. The highest male mean GSI value was found for the Yakonde site (0.24 ± 0.21) and at the Ayapo site (1.11 ± 1.01) for the females, with a fecundity of 191–2,720 eggs. The fish have spread to most parts of the lake, being conditioned to potentially spawn at any location, thereby providing an explanation for the observed rapid increase of the A. labiatus population over the last ten years. The results of the present study suggest a high invasive potential for this species in this and other similar lake habitats, warning that their careful management should be undertaken to restrict their further spread in Indonesia and elsewhere.